Drawing presses – PLC-controlled double column drawing press - 1.250 kN pressforce

Advertentie ID: M19646
Prijs op aanvraag
Verzend verzoek
Afbeeldingen
PLC-controlled double column drawing press - 1.250 kN pressforce - om tweedehands te kopen/uploadpic/tramaofinal_inserat/bilder/19646/HZPD1251.jpg,/uploadpic/tramaofinal_inserat/bilder/19646/HZPD1252.jpg

Locatie artikelen

Austria

Fabrikant

OSTERBERGER

Beschrijving

HZPD125PLC - very high quality hydraulic PLC-controlled double column drawing press, single cylinder production press with 1.250 kN nominal pressing force, column passage 1.250 mm, table size 1.200 x 700 mm - table height approx. 800 mm, ram plate size 1.000 x 400 mm, Tool installation height 600 mm (optional 1.000 mm), press ram guided with four prismatic guides (adjustable) - therefore the plunger plate can also be loaded off-centre, oil cooler, decompression valve for a quick return flow of the hydraulic oil from the press cylinder into the oil tank, adjustable pressure switch, two-hand release, piston rod stroke range 0 to 500 mm. Approach speed 42 mm / sec. - pressing speed 7 mm / sec. - Return speed 70 mm / sec., Front light barriers for securing the front press room, drive power 15 kW, dimensions 2,55 x 1,5 m x H 2,8 m, weight approximately 4.500 kg.

BOSCH / REXROTH proportional valves for the regulation of the ram speed and the pressing pressure - the regulation takes place via two rotary knobs, including the possibility of adjusting the approach speed of the press ram and the pressing speed.

SIEMENS PLC control with touch screen KTB 700 Basic, for storing up to fifty programs - choice between PLC operation and manual operation, press ram displacement measurement by encoder, pressure monitoring by measurement transducer, the following can be programmed: Distance of the press ram - dwell time of the press ram in the lower end position - decompression time - pressure - number of pieces.

Die cushion with 300 kN pressing force - die cushion area 430 x 290 mm - die cushion stroke range 250 mm - quadruple guided - holes for receiving the die plunger - safety valve for emptying the die cushion cylinder, front door with electrical monitoring, rapid traverse speed downwards 125 mm / sec.

Toestand

Gloednieuw

Bouwjaar

2020

Machine-uren

0

Machine onder stroom

Ja
Verzend verzoek

Aanbod van:

CNC - Maschinentechnik

CNC - Maschinentechnik
Hauptstraße 93
2384 Breitenfurt bei Wien

Contactpersoon: Wolfgang ECKER

Verzend verzoek
Toon telefoonnummer
Tel.: 0043 660 1327811
Bedrijfsprofiel weergeven



Andere interessante aanbiedingen in deze categorie Drawing presses

PLC-controlled column press - 2.000 kN pressforce
Drawing presses – PLC-controlled column press - 2.000 kN pressforce (BJ.2020)

Prijs op aanvraag
universal press with 1.500 kN pressforce
Drawing presses – universal press with 1.500 kN pressforce (BJ.2020)

Prijs op aanvraag
CO