Gebruikte machines: Kunststofverwerkingsmachines

Closing force: 550kN, opening stroke: 400mm, mould height: 250-650mm, column distance: 360x335mm, max. ejector stroke: 80mm, table dimensions: 565x540mm, max. tool weight: 600kg, screw diameter: 38mm, ...

Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.

Ref.Nr.: INNO25464

Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.

Ref.Nr.: ...

injection moulding machine ARBURG Allrounder 470C 1500-400

warehouse no.: 503391
manufacturer: ARBURG
type: Allrounder 470C 1500-400
controller: Selogica

Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with ...

Catalog No. : 5724
Type: GDM H-400B DC
Producer: Bühler
Made in: 1991
Characteristic:
Clamping force: 4600 kN
Brettgröße: 990x990 mm
Distance ...

Catalog No. : 5723
Type: GDK 750
Producer: Weingarten
Made in: 1987
Characteristic:
Clamping force: 866 t
Brettgröße: 1280x1280 mm
Distance ...

Catalog No. : 5345
Type: Insert 330H 90
Producer: Engel
Made in: 2006
Characteristic:
Hours on: 46238 h
Clamping force: 900 kN
Screw diameter: 25 ...

Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation.
The machine is immediately available, complete and ready for ...

Catalog No. : 6743
Type: MTF 1500 300
Producer: Maplan
Made in: 1998
Characteristic:
Clamping force: 300 t

Machine for the cutting of foils, including crane
For more technical data, see photos or on request
Machine documentation available
Total dimensions of the machine: 5400 x 4400 x ...

Catalog No. : 5849
Type: IS 220 GN
Producer: TOSHIBA
Made in: 2002
Characteristic:
Total hours: 756
Total number of shots: 5.767.094
Clamping force: ...

Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018.

Ref.Nr.: INNO25272

Drive power: 110kW, with reversing Film Take-Off Kirion T 1300, Monoblow Head Kirion 120/300-1, further accessories and documentation.

Ref.Nr.: INNO25263

Catalog No. : 6298
Type: 1000-430
Producer: DEMAG
Made in: 1995
Characteristic:
Clamping force: 100 t
Screw diameter: 40 mm
Injection capacity: 231 ...

Catalog No. : 6248
Type: A 270S-350-60
Producer: Arburg
Made in: 2001
Characteristic:
Total hours: 47.000 h
Clamping force: 35 t
Screw diameter: 22 ...

Forming surface: 750x436mm, heating output: 155kW, max. compressed air supply: 10bar, weight: 9.2t, operational hours counter: 43,589h.

Ref.Nr.: INNO25234

Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.

Ref.Nr.: INNO25233

Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly.

Ref.Nr.: INNO25171

Suitable for rigid foam, sawing width: 1250mm, max. sawing height: 200mm, max. speed: 12m/min, with controls cabinet or saw blade.

Ref.Nr.: INNO25153

With documentation, the machine should be tested.

Ref.Nr.: INNO25123

Clamping force: 1100kN, tie bar distance: 470x470mmm, opening stroke: 1000mm, screw diameter: 40mm, max. stroke volume: 201cm³, controls: MC5, length: 4600mm, width: 2650mm, height: 2250mm, weight: ...

Output: 200kg/h, motor power: 11kW, with instruction manual.

Ref.Nr.: INNO25046

Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used.

Ref.Nr.: INNO25034

Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools.

Ref.Nr.: INNO25030

Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric ...

Includes (1) Single Screw Extruder PME60/35, screw diameter: 60mm, screw length: 35D with degassing vacuum pump, barrel heating zones: 7x 20kW, throughput: 60-180kg/h, power: 70kW, with integrated ...

Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg.

Clamping plate dimensions: 830x770mm, distance between tie-bars: 560x500mm, ejector stroke: 200mm, screw diameter: 60mm, injection pressure: 1778bar, weight: 11.1t, with handling.

press capacity 148 to
material Hartmetallstangen
quality Extrusionspressvorgang 0
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ ...

screw size 115 mm
injection shot weight in Polysterol 3915 g/PS
closing pressure 6600 kN
total power requirement kW
weight of the machine ca. t
dimensions of the ...

screw size 133 mm
injection shot weight in Polysterol 5940 g/PS
closing pressure 8000 kN
total power requirement kW
weight of the machine ca. t
dimensions of the ...

screw size 84 mm
injection shot weight in Polysterol unbkt. g/PS
closing pressure 440 kN
volumn 1660
volt V
total power requirement kW
weight of the machine ca. ...

screw size 98 mm
injection shot weight in Polysterol unbkt. g/PS
closing pressure 8600 kN
total power requirement kW
weight of the machine ca. t
dimensions of the ...

screw size 62 mm
injection shot weight in Polysterol 903 g/PS
closing pressure 3300 kN
total power requirement kW
weight of the machine ca. t
dimensions of the machine ...

screw size unbkt mm
injection shot weight in Polysterol unbkt g/PS
closing pressure 100 kN
total power requirement kW
weight of the machine ca. t
dimensions of the ...

screw size unbkt. mm
injection shot weight in Polysterol unbkt. g/PS
closing pressure 150 kN
total power requirement kW
weight of the machine ca. t
dimensions of the ...

Mounting plate dimensions: 1250x2800mm, with electronic temperature regulation, including accessories and spare parts.

Ref.Nr.: INNO24381

Screw diameter: 95mm, distance between the bars: 900x800mm, max. opening path: 810mm, max. tool weight: 6.7t, operational pressure: 190bar, weight: 24t, with Industrial Robot FANUC M-16iL.

Clamping force: 420t, screw diameter: 70/ 15mm, injection volume: 1212/ 292cm³, length: 7900mm, width: 2200mm, height: 5000mm, weight: 25t, with robot.

Ref.Nr.: INNO24146

There are eight ARBURG Allrounder 220M available.

Ref.Nr.: INNO24121

Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.

Ref.Nr.: INNO24082

Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation.

Ref.Nr.: INNO20167

Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps ...

Closing force: 35t, max. shot weight: 47g, opening stroke: 530mm, installation height: 180-350mm, distance between the bars: 280x280mm, weight: 1.8t.

Ref.Nr.: INNO23819

Closing force: 50t, max. shot weight: 95g, opening stroke: 610mm, installation height: 210-400mm, distance between the bars: 350x350mm, weight: 2.5t.

Ref.Nr.: INNO23818

Closing force: 110t, max. shot weight: 280g, opening stroke: 850mm, installation height: 250-695mm, distance between the bars: 450x450mm, weight: 6.1t, with Handling Wittmann W621-480-NC4.

There are three identical machines available, screw diameter: 70mm, operational hours counter machine 1/ 2/ 3: 65,000/ 60,000/ 46,345h, year of construction machine 1/ 2/ 3: 2007/ 2008/ 2012, for each ...

Screw diameter: 35mm, clamping force: 50t, including Handling Walldorf, documentation and software.

Ref.Nr.: INNO23705