Gebruikte machines: Houtbewerkingsmachines

Grey aluminium milling cutter for window construction.
With adjustable stops
+ milling cutter

Product data:
Condition: good

DESCRIPTION
Saegeblattdiameter 370 mm
Cutting area around 115 mm
Section area square square 105 mm
Section length min. 730 mm
Cutting area flat 70 x 240 mm
Section ...

r
Descriptionr
r
Year of construction: 1998r
Loading: 440 mmr
max. Cutting height: 300 mmr
Total power requirement: 1,5 KW/400 Vr
Machine weight: 150 ...

Super stair milling cutter with additional. Support table, still fully in use,
Self-recovery, net prices

Keep in mind that the advertisement was translated automatically and may ...

Telltale Machine
Manufacturer Zimmermann
Type FZ SZ 2

Year of construction 1969
Ma. No. 192
Diameter 600 mm
Output 2.2 kW
Weight 350 kg

Length: 2400mm, width: 1400mm, height: 1400mm, weight: 400kg.

Ref.Nr.: INNO18830

Plant includes: (1) Cross Sander ERNST with longitudinal and vertical conveyor and blowing machine: working width: 1300mm (2) Chain and Belt Conveyor (3) Roller Coater BÜRKLE, for coating with oil, ...

Belt length: 1500/ 5100mm, with two belt speeds, height adjustable in two levels, suitable for case and surface grinding, including exhaust device.

Ref.Nr.: INNO16246

Max. Workpiece width: 30mm, grinding cycle single/ double stroke: 2.5-3/ 5-6s, table dimensions: 1130x1130mm, grinding/ milling and grinding rotational speed: 400-3000/ 600-6000/min, spindle diameter: ...

Cutting range with/ without counter clocks: 140/ 120mm, motor power: 750W, motor speed: 2800/min, compressed air supply: 6-8bar, weight: 129kg.

Ref.Nr.: INNO17329

Suitable for KD, AD and MD-frames, with automatic profile length measurment, program selection and calculation of the number of ventilation slots.

Ref.Nr.: INNO12862

Rotational speed: 2810/min, connected load: 11kW, with seal groove aggregates, inner corner knifes and two outer contour milling spindles.

Ref.Nr.: INNO17324

Veneer strength: 0.3-3mm, throat depth: 1150mm, feed rate: 10-30m/min, length: 2140mm, width: 780mm, weight: 525kg.

Ref.Nr.: INNO17997

There are two identical machines available, max. saw blade diameter: 450mm, table dimensions: 1000x665mm, saw blade bore: 30mm, cutting height: 140mm, power: 3.5kW.

Ref.Nr.: INNO15886

Table dimensions: 2800x950mm, grinding shoe width: 150mm, grinding belt width: 150mm, speed: 22m/s, extraction diameter: 160mm, nominal current: 17A, motor power: 7.7kW, length: 4000mm, width: 1300mm, ...

Table dimensions: 1500x900mm, max. load: 2t, number/ width/ height of T-grooves: 5/ 22H7x185mm, bed length: 4390mm, planing length/ width/ height: 1500/ 1020/ 810mm, planing height with traverse ...

Timber length/ diameter: 5000-21,000/ 600mm, timber diameter: 600mm, max. timber weight: 60t, connected load: 65kW, including Chop Saw HOLTEC, year of construction: 2012, handling equipment SÄNGER ...

Working width: 620mm, grinding height: 160mm, speed: 25m/s, grinding belt dimensions: 1900x620mm, max. feed: 16m/min.

Ref.Nr.: INNO16835

Used aborts
Internal machine number m2951

Manufacturer SCM
Type F 520

Hobelwidth 520 mm
Power 4 kW
4-knife shaft
Slotted table lips
Weight ...

Used plate-type machine tool
Internal machine number m2874

Manufacturer Zimmermann
Type FZ SZ 1

Year of construction 1985
Diameter 600 mm